On this page7
A guillotine shearing machine cuts sheet and plate in one straight stroke. The upper blade comes down on the sheet held on the table and cuts it against the lower blade, so a full-width blank comes off in seconds, with no heat and no kerf. It is the first machine of most sheet metal workshops: the shear cuts the blanks, the press brake bends them. TFI has built metalworking machines since 1965.
This guide is for workshop owners and buyers in the UAE choosing a shear: what it does well, which build to pick and how to read its capacity.
5 benefits of a guillotine shearing machine
Square blanks.
A straight blade and a square table give blanks with straight, square edges, ready for the press brake.
Fast, cold cuts.
One stroke cuts the whole width; there is no heat, no melted edge and no material lost to a kerf.
A cut set to the material.
On a guillotine shear the cutting (rake) angle and the blade gap are adjusted to the material and its thickness: a lower angle gives a straighter part, a higher angle needs less force.
Repeat sizes.
The back gauge stops the sheet at the size you set; on a CNC shear sizes are programmed.
Low cost per cut.
No gas, no consumables except the blades, which can be turned and reground.
Square blanks.
A straight blade and a square table give blanks with straight, square edges, ready for the press brake.
Fast, cold cuts.
One stroke cuts the whole width; there is no heat, no melted edge and no material lost to a kerf.
A cut set to the material.
On a guillotine shear the cutting (rake) angle and the blade gap are adjusted to the material and its thickness: a lower angle gives a straighter part, a higher angle needs less force.
Repeat sizes.
The back gauge stops the sheet at the size you set; on a CNC shear sizes are programmed.
Low cost per cut.
No gas, no consumables except the blades, which can be turned and reground.
Swing beam or guillotine?
Swing beam or guillotine shear
How the blade moves
- Swing beam shear
- On an arc, around a pivot
- Guillotine shear
- Straight down, in guides
Cutting angle
- Swing beam shear
- Fixed
- Guillotine shear
- Adjustable to the material
Best for
- Swing beam shear
- Thin and medium sheet, daily blanks
- Guillotine shear
- Thicker plate, stainless steel, straighter parts
TFI models
- Swing beam shear
- TFI Shear 3 and 5
- Guillotine shear
- TFI Shear 7 and 9
Swing beam or guillotine shear
How the blade moves
- Swing beam shear
- On an arc, around a pivot
- Guillotine shear
- Straight down, in guides
Cutting angle
- Swing beam shear
- Fixed
- Guillotine shear
- Adjustable to the material
Best for
- Swing beam shear
- Thin and medium sheet, daily blanks
- Guillotine shear
- Thicker plate, stainless steel, straighter parts
TFI models
- Swing beam shear
- TFI Shear 3 and 5
- Guillotine shear
- TFI Shear 7 and 9
How to size a shear
Length
the widest sheet you cut, for example 2500, 3200 or 4000 mm.
Thickness
capacity is given for mild steel. Stainless steel cuts about a third thinner: a 6 mm shear cuts about 4 mm stainless*.
Back gauge
its depth and whether it is NC or CNC.
Blade gap
set to the material; a wrong gap can damage the blades even within capacity.
Length
the widest sheet you cut, for example 2500, 3200 or 4000 mm.
Thickness
capacity is given for mild steel. Stainless steel cuts about a third thinner: a 6 mm shear cuts about 4 mm stainless*.
Back gauge
its depth and whether it is NC or CNC.
Blade gap
set to the material; a wrong gap can damage the blades even within capacity.
TFI shearing machine capacities by tier
TFI Shear 3
- Build
- Hydraulic swing beam
- Control*
- NC back gauge
- Mild steel*
- 4 to 12 mm*
- Cutting length*
- 2500 or 3200 mm*
TFI Shear 5
- Build
- Hydraulic swing beam
- Control*
- CNC back gauge
- Mild steel*
- 4 to 10 mm*
- Cutting length*
- 2500 or 3200 mm*
TFI Shear 7
- Build
- Hydraulic guillotine
- Control*
- NC back gauge, adjustable cutting angle
- Mild steel*
- 6 to 20 mm*
- Cutting length*
- 2500 to 4000 mm*
TFI Shear 9
- Build
- Hydraulic guillotine
- Control*
- Full CNC: back gauge, cutting angle and blade gap
- Mild steel*
- 6 to 20 mm*
- Cutting length*
- 3200 to 6000 mm*
TFI shearing machine capacities by tier
TFI Shear 3
- Build
- Hydraulic swing beam
- Control*
- NC back gauge
- Mild steel*
- 4 to 12 mm*
- Cutting length*
- 2500 or 3200 mm*
TFI Shear 5
- Build
- Hydraulic swing beam
- Control*
- CNC back gauge
- Mild steel*
- 4 to 10 mm*
- Cutting length*
- 2500 or 3200 mm*
TFI Shear 7
- Build
- Hydraulic guillotine
- Control*
- NC back gauge, adjustable cutting angle
- Mild steel*
- 6 to 20 mm*
- Cutting length*
- 2500 to 4000 mm*
TFI Shear 9
- Build
- Hydraulic guillotine
- Control*
- Full CNC: back gauge, cutting angle and blade gap
- Mild steel*
- 6 to 20 mm*
- Cutting length*
- 3200 to 6000 mm*
The Kerman shearing machine (TFI Shear 7) is TFI's hydraulic guillotine shear with an adjustable cutting angle. For care and repair, see shear servicing in the UAE.
TFI shearing machine on video
A TFI shearing machine at work, from the TFI Co. YouTube channel.
Frequently asked questions
What is the difference between a guillotine and a swing beam shear?
The guillotine blade moves straight down and its cutting angle can be adjusted; the swing beam blade moves on an arc with a fixed angle. Guillotines suit thicker plate and stainless steel.
Can a shear cut stainless steel?
Yes, at about two thirds of its mild steel capacity*. Ask TFI with your grade and thickness.
What is the blade gap?
The small gap between the upper and lower blade. It is set to the material and thickness for a clean cut.
Does TFI supply shear blades?
Yes. Ask TFI with the length and thickness of your blades.
Ask TFI for a quote
Send the material, thickness and length you work with, and ask TFI for the datasheet and a quotation.

Talk to TFI about your shearing machine
Ask TFI for more. Send the material, thickness and length you work with, chat with us on Telegram or call us, and ask for the datasheet and a quotation.
- Section
- Industrial Machines for UAE
- Updated
- 16 November 2026
- Reading time
- 4 min read
Discuss this with our team
Tell us what you need: call us or chat on Telegram, and our team gets back to you.
Send an enquiry
