On this page9
  1. What a ironworker service covers
  2. Ironworker servicing in pictures
  3. Signs your ironworker needs service
  4. Parts and tools from TFI
  5. How to book a service
  6. TFI ironworker on video
  7. Frequently asked questions
  8. Ask TFI for a quote
  9. Talk to TFI about your ironworker service

TFI services ironworkers in the UAE: TFI ironworkers and other makes. An ironworker punches, shears flat bar, angle and round bar, and notches, so a service goes station by station: punch and die alignment, blade clearance, the notcher, the hydraulics and the safety guards. TFI has built metalworking machines since 1965.

What a ironworker service covers

What a ironworker service covers

Part of the machineWhat the service engineer checks

Punch station
Punch centred in the die; punch nut, die and stripper tight and in good condition
Flat bar shear
Blade clearance measured with a feeler gauge; blade edges and bolts
Section shear (angle, round, square)
Blades and their fit; clean cut without twisting the bar
Notcher
Blades, clearance and guides
Hydraulics
Oil level and condition, filters, leaks at cylinder, valves and hoses
Guides and pins
Greased at the grease points; gib pins snug and lubricated
Electrics and safety
Guards on every station, emergency stop, foot pedal, stroke limits
Test
Test punch and cuts in your material, checked with you

What a ironworker service covers

Part of the machineWhat the service engineer checks

Punch station
Punch centred in the die; punch nut, die and stripper tight and in good condition
Flat bar shear
Blade clearance measured with a feeler gauge; blade edges and bolts
Section shear (angle, round, square)
Blades and their fit; clean cut without twisting the bar
Notcher
Blades, clearance and guides
Hydraulics
Oil level and condition, filters, leaks at cylinder, valves and hoses
Guides and pins
Greased at the grease points; gib pins snug and lubricated
Electrics and safety
Guards on every station, emergency stop, foot pedal, stroke limits
Test
Test punch and cuts in your material, checked with you

Every service starts with the machine locked out and the power off. Clearances and settings follow the manual of your machine.

Ironworker servicing in pictures

Visitors checking a TFI ironworker before servicing
Customers at a TFI ironworker
Punch and die set of a TFI ironworker punching station
Round punch and die
Control buttons and tool set of the Sanandaj ironworker
Controls, emergency stop, tools

Signs your ironworker needs service

  • Holes are off centre or punches break.

  • Cuts are rough, bent or twisted.

  • The stripper does not hold the work.

  • The ram moves slowly or unevenly.

  • Oil leaks or the oil runs hot.

  • Holes are off centre or punches break.

  • Cuts are rough, bent or twisted.

  • The stripper does not hold the work.

  • The ram moves slowly or unevenly.

  • Oil leaks or the oil runs hot.

Parts and tools from TFI

TFI makes punches, dies and shear blades for ironworkers and supplies spare parts for TFI ironworkers. Send the tool size or the machine model.

How to book a service

  1. Tell TFI about the machine

    make, model, year, and a photo of the nameplate.

  2. Describe the problem

    what happens, when it started, a photo or a short video.

  3. TFI replies with the next step

    advice, a visit, or parts, with a quotation.

  4. Service on site

    the engineer checks, adjusts and repairs, then tests the machine with you.

  1. Tell TFI about the machine

    make, model, year, and a photo of the nameplate.

  2. Describe the problem

    what happens, when it started, a photo or a short video.

  3. TFI replies with the next step

    advice, a visit, or parts, with a quotation.

  4. Service on site

    the engineer checks, adjusts and repairs, then tests the machine with you.

TFI's hydraulic ironworker: the Sanandaj ironworker (TFI Iron 5). All services: machine servicing in the UAE.

TFI ironworker on video

A TFI hydraulic ironworker with its punching, shearing and notching stations, from the TFI Co. YouTube channel.

YouTube

TFI ironworker – video

Loading it connects to YouTube, which may set cookies.

Open on YouTube

Frequently asked questions

Does TFI service ironworkers of other makes?

Yes, ask TFI with the make and model; send a photo of the nameplate.

How often should punch and die alignment be checked?

At the start of work and from time to time during the day, and after every tool change.

Why do my punches break?

Common causes are a punch not centred in the die, the wrong die clearance for the thickness, or worn tools. A service finds the cause.

Can TFI supply punches and dies?

Yes. Send the size and shape of the hole and the machine model.

Ask TFI for a quote

For ironworker servicing, send the make and model of your ironworker, a photo of its nameplate and what goes wrong. TFI replies with advice, a visit date or parts, with a quotation.

contact us

Fill in the form below - a real person reads every answer.

  • 10 questions
  • About 1 minute
Salutation
Preferred Communication Method (optional)
Salutation
Preferred Communication Method (optional)

We use your answers only to reply to you. They are kept for 425 days. Your answers stay on this device for 24 hours until you send them.

What happens next

  1. We read your request, usually the same working day.
  2. A specialist replies with answers or a few questions.
  3. You decide - no obligation.
QR code that opens a Telegram chat with TFI Co at t.me/tfico
Scan to chat with TFI on Telegram (t.me/tfico)

Talk to TFI about your ironworker service

Send the make and model of your ironworker and what goes wrong, call us or chat on Telegram. TFI replies with advice, a visit date or parts.
Section
Machine Servicing in the UAE – TFI Co
Updated
16 November 2026
Reading time
3 min read

Discuss this with our team

Tell us what you need: call us or chat on Telegram, and our team gets back to you.

Send an enquiry