On this page9
TFI services press brakes in the UAE: TFI press brakes and other makes, NC and CNC. A service brings back even, repeatable angles: the engineer checks the hydraulics, the ram and its parallelism, the back gauge, the tools and the safety devices. TFI has built metalworking machines since 1965.
What a press brake service covers
What a press brake service covers
Part of the machineWhat the service engineer checks
- Hydraulics
- Oil level and condition, filters, leaks at cylinders, valves and hoses; pressure and oil temperature
- Ram
- Moves evenly, holds its position, no drift; both sides parallel to the bed (torsion bar or Y1 and Y2 synchronisation)
- Back gauge
- X (and R) positions match the control; screws and guides clean and lubricated
- Crowning
- Works and is set, so the angle stays even along long parts
- Punches and dies
- Working edges, wear, clamping and alignment
- CNC or NC control
- Programs, settings and backups; buttons and pedals
- Guides and pins
- Greased; wear and play
- Safety
- Light curtain or guards, emergency stop, foot pedal
- Test
- Test bends in your material; angles checked along the length with you
What a press brake service covers
Part of the machineWhat the service engineer checks
- Hydraulics
- Oil level and condition, filters, leaks at cylinders, valves and hoses; pressure and oil temperature
- Ram
- Moves evenly, holds its position, no drift; both sides parallel to the bed (torsion bar or Y1 and Y2 synchronisation)
- Back gauge
- X (and R) positions match the control; screws and guides clean and lubricated
- Crowning
- Works and is set, so the angle stays even along long parts
- Punches and dies
- Working edges, wear, clamping and alignment
- CNC or NC control
- Programs, settings and backups; buttons and pedals
- Guides and pins
- Greased; wear and play
- Safety
- Light curtain or guards, emergency stop, foot pedal
- Test
- Test bends in your material; angles checked along the length with you
Every service starts with the machine locked out and the power off. Clearances and settings follow the manual of your machine.
Press brake parts in pictures



Signs your press brake needs service
Angles change along the part or from part to part.
The ram drifts, moves unevenly or slowly.
The oil runs hot, foams, or the pump is louder.
Oil leaks at cylinders, hoses or valves.
Back gauge positions do not match the control.
Angles change along the part or from part to part.
The ram drifts, moves unevenly or slowly.
The oil runs hot, foams, or the pump is louder.
Oil leaks at cylinders, hoses or valves.
Back gauge positions do not match the control.
Parts and tools from TFI
TFI makes press brake punches and dies (straight, gooseneck, multi-V dies, hemming tools) and supplies spare parts for TFI press brakes. For other makes, send the tool drawing or the machine model.
How to book a service
Tell TFI about the machine
make, model, year, and a photo of the nameplate.
Describe the problem
what happens, when it started, a photo or a short video.
TFI replies with the next step
advice, a visit, or parts, with a quotation.
Service on site
the engineer checks, adjusts and repairs, then tests the machine with you.
Tell TFI about the machine
make, model, year, and a photo of the nameplate.
Describe the problem
what happens, when it started, a photo or a short video.
TFI replies with the next step
advice, a visit, or parts, with a quotation.
Service on site
the engineer checks, adjusts and repairs, then tests the machine with you.
Daily, weekly and yearly care: see the press brake maintenance schedule. TFI's CNC press brake: the Abadan press brake (TFI Bend 5). All services: machine servicing in the UAE.
TFI press brake machine on video
The TFI Abadan hydraulic press brake machine, from the TFI Co. YouTube channel.
Frequently asked questions
Does TFI service press brakes of other makes?
Yes, ask TFI with the make and model; send a photo of the nameplate.
Why do my bend angles change along the part?
Common causes are crowning, worn tools, ram parallelism or the hydraulics. A service finds and fixes the cause.
How often should a press brake be serviced?
Follow the manual; a yearly service with oil and filters plus daily care is a common practice.
Can TFI make tools for my press brake?
Yes. Send the drawing of your part or of the tools.
Ask TFI for a quote
For press brake servicing, send the make and model of your press brake, a photo of its nameplate and what goes wrong. TFI replies with advice, a visit date or parts, with a quotation.

Talk to TFI about your press brake service
- Section
- Machine Servicing in the UAE – TFI Co
- Updated
- 15 November 2026
- Reading time
- 3 min read
Discuss this with our team
Tell us what you need: call us or chat on Telegram, and our team gets back to you.
Send an enquiry