On this page9
  1. Why a CNC band saw
  2. CNC band saw details
  3. Characteristics
  4. CNC band saw sizes
  5. What Saw 9 is for
  6. Saw 9 in the TFI ladder
  7. Frequently asked questions
  8. Ask TFI for a quote
  9. Talk to TFI about your batch cutting

TFI Saw 9 is the CNC band saw at the top of the TFI band saw range. Type the length and the number of pieces on the touch screen and press start: the saw feeds the bar, measures the length, clamps, cuts and repeats until the batch is done. The operator loads bars and takes away finished parts. TFI has built metalworking machines since 1965.

Why a CNC band saw

  • Length and quantity programmed.

    Set the cut length and how many pieces; the saw counts them and stops when the batch is complete.

  • Measured feed.

    A grating ruler reads the feed travel, so each piece is cut to the length on the screen.

  • Unattended batches.

    Feed, clamp, cut and return run as one automatic cycle.

  • Double column frame.

    The saw frame moves straight down on two columns and meets the bar square.

  • Three blade speeds.

    27, 45 and 69 m/min for tool steel, carbon steel and softer metals.

  • Length and quantity programmed.

    Set the cut length and how many pieces; the saw counts them and stops when the batch is complete.

  • Measured feed.

    A grating ruler reads the feed travel, so each piece is cut to the length on the screen.

  • Unattended batches.

    Feed, clamp, cut and return run as one automatic cycle.

  • Double column frame.

    The saw frame moves straight down on two columns and meets the bar square.

  • Three blade speeds.

    27, 45 and 69 m/min for tool steel, carbon steel and softer metals.

CNC band saw details

Hydraulic feed cylinder and coolant hose on a TFI band saw
Cylinder lowers the saw frame
Hydraulic pump and blade guide inside a TFI band saw
Hydraulic pump in the base

Characteristics

TFI Saw 9 characteristics

FeatureTFI Saw 9

Control
Programmable control with touch screen
What you enter
Cut length and number of pieces
Feed length measurement
Grating ruler
Single feed stroke
500 mm
Length accuracy
± 0.2 mm
Clamping
Hydraulic vices
Saw frame feed
Hydraulic
Coolant
Built-in pump

TFI Saw 9 characteristics

FeatureTFI Saw 9

Control
Programmable control with touch screen
What you enter
Cut length and number of pieces
Feed length measurement
Grating ruler
Single feed stroke
500 mm
Length accuracy
± 0.2 mm
Clamping
Hydraulic vices
Saw frame feed
Hydraulic
Coolant
Built-in pump

Pieces longer than one feed stroke: ask TFI for the length you need.

CNC band saw sizes

The model name gives the size: the largest round bar in millimetres.

TFI Saw 9 sizes

  • TFI Saw 9 280

    Round bar*
    Ø 280 mm
    Square*
    280 × 280 mm
    Blade*
    3505 × 27 × 0.9 mm
    Blade speed*
    27 / 45 / 69 m/min
    Main motor*
    3 kW
    Hydraulic pump*
    0.75 kW
    Coolant pump*
    0.04 kW
    Size (L × W × H)*
    1860 × 2400 × 1400 mm
  • TFI Saw 9 350

    Round bar*
    Ø 350 mm
    Square*
    350 × 350 mm
    Blade*
    4115 × 34 × 1.1 mm
    Blade speed*
    27 / 45 / 69 m/min
    Main motor*
    3 kW
    Hydraulic pump*
    0.75 kW
    Coolant pump*
    0.04 kW
    Size (L × W × H)*
    2000 × 2500 × 1500 mm
  • TFI Saw 9 400

    Round bar*
    Ø 400 mm
    Square*
    400 × 400 mm
    Blade*
    5000 × 41 × 1.3 mm
    Blade speed*
    27 / 45 / 69 m/min
    Main motor*
    4 kW
    Hydraulic pump*
    0.75 kW
    Coolant pump*
    0.09 kW
    Size (L × W × H)*
    2400 × 1100 × 1900 mm

TFI Saw 9 sizes

  • TFI Saw 9 280

    Round bar*
    Ø 280 mm
    Square*
    280 × 280 mm
    Blade*
    3505 × 27 × 0.9 mm
    Blade speed*
    27 / 45 / 69 m/min
    Main motor*
    3 kW
    Hydraulic pump*
    0.75 kW
    Coolant pump*
    0.04 kW
    Size (L × W × H)*
    1860 × 2400 × 1400 mm
  • TFI Saw 9 350

    Round bar*
    Ø 350 mm
    Square*
    350 × 350 mm
    Blade*
    4115 × 34 × 1.1 mm
    Blade speed*
    27 / 45 / 69 m/min
    Main motor*
    3 kW
    Hydraulic pump*
    0.75 kW
    Coolant pump*
    0.04 kW
    Size (L × W × H)*
    2000 × 2500 × 1500 mm
  • TFI Saw 9 400

    Round bar*
    Ø 400 mm
    Square*
    400 × 400 mm
    Blade*
    5000 × 41 × 1.3 mm
    Blade speed*
    27 / 45 / 69 m/min
    Main motor*
    4 kW
    Hydraulic pump*
    0.75 kW
    Coolant pump*
    0.09 kW
    Size (L × W × H)*
    2400 × 1100 × 1900 mm

What Saw 9 is for

Jobs

  • Batches of parts cut to one length

    Saw 9
    Best fit
    Note
    Length and quantity programmed
  • Production lines and subcontract cutting

    Saw 9
    Best fit
    Note
    Runs the batch by itself
  • Bar stock for machining and forging

    Saw 9
    Yes
    Note
    Measured feed for each piece
  • Single heavy sections over Ø 400 mm

    Saw 9
    Choose Saw 5 or Saw 7
    Note
    Larger double column sizes
  • Occasional cuts in a small workshop

    Saw 9
    Choose Saw 3
    Note
    Hinged arm

Jobs

  • Batches of parts cut to one length

    Saw 9
    Best fit
    Note
    Length and quantity programmed
  • Production lines and subcontract cutting

    Saw 9
    Best fit
    Note
    Runs the batch by itself
  • Bar stock for machining and forging

    Saw 9
    Yes
    Note
    Measured feed for each piece
  • Single heavy sections over Ø 400 mm

    Saw 9
    Choose Saw 5 or Saw 7
    Note
    Larger double column sizes
  • Occasional cuts in a small workshop

    Saw 9
    Choose Saw 3
    Note
    Hinged arm

Saw 9 in the TFI ladder

Band saw tiers

  • Saw 3

    Build
    Hinged (scissor) arm
    Operation
    Semi-automatic: you load, it cuts and stops
  • Saw 5

    Build
    Double column
    Operation
    Semi-automatic: hydraulic clamping and feed
  • Saw 7

    Build
    Double column
    Operation
    Automatic: feeds the bar and cuts again by itself
  • Saw 9

    Build
    Double column
    Operation
    Automatic with CNC: lengths and quantities programmed

Band saw tiers

  • Saw 3

    Build
    Hinged (scissor) arm
    Operation
    Semi-automatic: you load, it cuts and stops
  • Saw 5

    Build
    Double column
    Operation
    Semi-automatic: hydraulic clamping and feed
  • Saw 7

    Build
    Double column
    Operation
    Automatic: feeds the bar and cuts again by itself
  • Saw 9

    Build
    Double column
    Operation
    Automatic with CNC: lengths and quantities programmed

See the TFI band saw range, the TFI Saw 5 double column band saw, the TFI Saw 3 hinged arm band saw, the TFI Saw 7 automatic band saws and machine servicing in the UAE.

Frequently asked questions

What does TFI Saw 9 350 mean?

A tier-9 CNC band saw that cuts round bar up to Ø 350 mm and square bar up to 350 × 350 mm.

What is the difference between Saw 7 and Saw 9?

Both feed the bar and cut again by themselves. Saw 9 adds the programmable control: you enter the length and the number of pieces, and a grating ruler measures every feed.

How accurate is the cut length?

Machines of this class are listed at about ± 0.2 mm length error. Ask TFI for the figure for your model and material.

Which blade should I use?

It depends on the material and the section; ask TFI for the right blade.

Ask TFI for a quote

Send the material, thickness and length you work with, and ask TFI for the datasheet and a quotation.

contact us

Fill in the form below - a real person reads every answer.

  • 10 questions
  • About 1 minute
Salutation
Preferred Communication Method (optional)
Salutation
Preferred Communication Method (optional)

We use your answers only to reply to you. They are kept for 425 days. Your answers stay on this device for 24 hours until you send them.

What happens next

  1. We read your request, usually the same working day.
  2. A specialist replies with answers or a few questions.
  3. You decide - no obligation.
QR code that opens a Telegram chat with TFI Co at t.me/tfico
Scan to chat with TFI on Telegram (t.me/tfico)

Talk to TFI about your batch cutting

Ask TFI for more. Send the material, thickness and length you work with, chat with us on Telegram or call us, and ask for the datasheet and a quotation.

Section
Band Saw Machines
Reading time
4 min read

Discuss this with our team

Tell us what you need: call us or chat on Telegram, and our team gets back to you.

Send an enquiry