On this page9
  1. TFI Bend 7 characteristics
  2. Why an electro-hydraulic press brake
  3. Sizes and capacities
  4. What Bend 7 is for
  5. Bend 7 in the TFI ladder
  6. TFI press brake machine on video
  7. Frequently asked questions
  8. Ask TFI for a quote
  9. Talk to TFI about your precision bending

TFI Bend 7 is the electro-hydraulic press brake for precision work. Two independent cylinders drive the ram, each controlled by the CNC on its own axis, so the beam stays parallel under off-centre loads and can even be tilted on purpose for tapered parts. Crowning and a fast back gauge are part of the build. TFI has built metalworking machines since 1965.

TFI Bend 7 characteristics

TFI Bend 7 characteristics

CharacteristicTFI Bend 7

Model family
TFI Bend 7
Machine
Electro-hydraulic press brake
Synchronisation
Two independent cylinders (Y1, Y2)
Control
CNC, back gauge X and R, crowning
Force
63 to 160 tonnes*
Bed length
1600 to 3200 mm*
Model numbers
TFI Bend 7 63/1600, TFI Bend 7 80/3200, TFI Bend 7 100/3200, TFI Bend 7 160/3200
How to read the name
TFI Bend 7, then the size: force in tonnes / bed length in mm
Made by
TFI Co., builder of metalworking machines since 1965
Datasheet and price
Ask TFI: chat on Telegram, call, or use the quote form

TFI Bend 7 characteristics

CharacteristicTFI Bend 7

Model family
TFI Bend 7
Machine
Electro-hydraulic press brake
Synchronisation
Two independent cylinders (Y1, Y2)
Control
CNC, back gauge X and R, crowning
Force
63 to 160 tonnes*
Bed length
1600 to 3200 mm*
Model numbers
TFI Bend 7 63/1600, TFI Bend 7 80/3200, TFI Bend 7 100/3200, TFI Bend 7 160/3200
How to read the name
TFI Bend 7, then the size: force in tonnes / bed length in mm
Made by
TFI Co., builder of metalworking machines since 1965
Datasheet and price
Ask TFI: chat on Telegram, call, or use the quote form

Why an electro-hydraulic press brake

  • Two cylinders, one controller.

    Y1 and Y2 are closed-loop axes: the CNC keeps both ends of the ram in step, with no torsion bar to twist under a load at one end.

  • Bends off-centre and tapered.

    Short parts can be bent at the end of the bed, and the two sides can stop at different depths for a taper.

  • Crowning.

    The table is crowned to match the ram, so a long bend has the same angle in the middle as at the ends.

  • Fast cycle.

    Approach up to 200 mm/s, controlled bending up to 15 mm/s, return up to 160 mm/s.

  • Fast, precise back gauge.

    X and R axes at up to 400 mm/s with ±0.01 mm positioning on the 100/3200.

  • Two cylinders, one controller.

    Y1 and Y2 are closed-loop axes: the CNC keeps both ends of the ram in step, with no torsion bar to twist under a load at one end.

  • Bends off-centre and tapered.

    Short parts can be bent at the end of the bed, and the two sides can stop at different depths for a taper.

  • Crowning.

    The table is crowned to match the ram, so a long bend has the same angle in the middle as at the ends.

  • Fast cycle.

    Approach up to 200 mm/s, controlled bending up to 15 mm/s, return up to 160 mm/s.

  • Fast, precise back gauge.

    X and R axes at up to 400 mm/s with ±0.01 mm positioning on the 100/3200.

Sizes and capacities

The model name gives the size: force in tonnes / bed length in millimetres. Full-length capacity is the mild steel thickness bent over the whole bed in a V-die eight times the thickness.

TFI Bend 7 sizes

  • TFI Bend 7 63/1600

    Force*
    63 t
    Bed length*
    1600 mm
    Mild steel, full length*
    5 mm
    Throat depth*
    –
    Stroke*
    –
    Open height*
    –
    Approach / bend / return*
    180 / 10 / 160 mm/s
    Back gauge travel*
    –
    Main motor*
    –
  • TFI Bend 7 80/3200

    Force*
    80 t
    Bed length*
    3200 mm
    Mild steel, full length*
    3 mm
    Throat depth*
    –
    Stroke*
    –
    Open height*
    –
    Approach / bend / return*
    200 / 0–15 / 160 mm/s
    Back gauge travel*
    –
    Main motor*
    –
  • TFI Bend 7 100/3200

    Force*
    100 t
    Bed length*
    3200 mm
    Mild steel, full length*
    4 mm
    Throat depth*
    –
    Stroke*
    –
    Open height*
    420 mm
    Approach / bend / return*
    –
    Back gauge travel*
    500 mm
    Main motor*
    –
  • TFI Bend 7 160/3200

    Force*
    160 t
    Bed length*
    3200 mm
    Mild steel, full length*
    6 mm
    Throat depth*
    –
    Stroke*
    200 mm
    Open height*
    –
    Approach / bend / return*
    100 / 9 / 80 mm/s
    Back gauge travel*
    –
    Main motor*
    11 kW

TFI Bend 7 sizes

  • TFI Bend 7 63/1600

    Force*
    63 t
    Bed length*
    1600 mm
    Mild steel, full length*
    5 mm
    Throat depth*
    –
    Stroke*
    –
    Open height*
    –
    Approach / bend / return*
    180 / 10 / 160 mm/s
    Back gauge travel*
    –
    Main motor*
    –
  • TFI Bend 7 80/3200

    Force*
    80 t
    Bed length*
    3200 mm
    Mild steel, full length*
    3 mm
    Throat depth*
    –
    Stroke*
    –
    Open height*
    –
    Approach / bend / return*
    200 / 0–15 / 160 mm/s
    Back gauge travel*
    –
    Main motor*
    –
  • TFI Bend 7 100/3200

    Force*
    100 t
    Bed length*
    3200 mm
    Mild steel, full length*
    4 mm
    Throat depth*
    –
    Stroke*
    –
    Open height*
    420 mm
    Approach / bend / return*
    –
    Back gauge travel*
    500 mm
    Main motor*
    –
  • TFI Bend 7 160/3200

    Force*
    160 t
    Bed length*
    3200 mm
    Mild steel, full length*
    6 mm
    Throat depth*
    –
    Stroke*
    200 mm
    Open height*
    –
    Approach / bend / return*
    100 / 9 / 80 mm/s
    Back gauge travel*
    –
    Main motor*
    11 kW

What Bend 7 is for

Jobs

  • Precision parts with tight angle tolerances

    Bend 7
    Best fit
    Note
    Closed-loop Y1 and Y2
  • Several short parts along the bed

    Bend 7
    Best fit
    Note
    Off-centre loads stay level
  • Tapered and conical parts

    Bend 7
    Yes
    Note
    Y1 and Y2 can stop at different depths
  • Long bends with an even angle

    Bend 7
    Yes
    Note
    Crowning across the bed
  • Batches of simple bends

    Bend 7
    Yes
    Note
    Bend 5 costs less for this
  • Lowest energy use, quiet shop

    Bend 7
    Choose Bend 9
    Note
    Servo-electric or hybrid drive

Jobs

  • Precision parts with tight angle tolerances

    Bend 7
    Best fit
    Note
    Closed-loop Y1 and Y2
  • Several short parts along the bed

    Bend 7
    Best fit
    Note
    Off-centre loads stay level
  • Tapered and conical parts

    Bend 7
    Yes
    Note
    Y1 and Y2 can stop at different depths
  • Long bends with an even angle

    Bend 7
    Yes
    Note
    Crowning across the bed
  • Batches of simple bends

    Bend 7
    Yes
    Note
    Bend 5 costs less for this
  • Lowest energy use, quiet shop

    Bend 7
    Choose Bend 9
    Note
    Servo-electric or hybrid drive

Bend 7 in the TFI ladder

Press brake tiers

  • Bend 3

    Synchronisation
    Torsion bar
    Control
    NC
  • Bend 5

    Synchronisation
    Torsion bar
    Control
    CNC, servo X and Y
  • Bend 7

    Synchronisation
    Electro-hydraulic, two independent cylinders
    Control
    CNC, Y1 Y2 X R, crowning
  • Bend 9

    Synchronisation
    Servo-electric or hybrid drive
    Control
    CNC

Press brake tiers

  • Bend 3

    Synchronisation
    Torsion bar
    Control
    NC
  • Bend 5

    Synchronisation
    Torsion bar
    Control
    CNC, servo X and Y
  • Bend 7

    Synchronisation
    Electro-hydraulic, two independent cylinders
    Control
    CNC, Y1 Y2 X R, crowning
  • Bend 9

    Synchronisation
    Servo-electric or hybrid drive
    Control
    CNC

See the Abadan press brake range, the top 5 benefits of a press brake and press brake servicing in the UAE.

TFI press brake machine on video

The TFI Abadan hydraulic press brake machine, from the TFI Co. YouTube channel.

YouTube

TFI Abadan press brake machine – video

Loading it connects to YouTube, which may set cookies.

Open on YouTube

Frequently asked questions

What does TFI Bend 7 100/3200 mean?

A tier-7 electro-hydraulic press brake with 100 tonnes of force and a 3200 mm bed.

Bend 5 or Bend 7?

Bend 5 keeps the ram level with a torsion bar. Bend 7 has two independent cylinders under CNC control, plus crowning: better angles on long and off-centre bends, and tapered parts are possible.

How thick can it bend?

Over the full bed, about 5 mm mild steel on the 63/1600, 4 mm on the 100/3200 and 6.5 mm on the 160/3200. Shorter parts can be thicker.

Can it bend stainless steel?

Yes. Allow about 1.5 times the force of mild steel when choosing the tonnage.

Ask TFI for a quote

Send the material, thickness and length you work with, and ask TFI for the datasheet and a quotation.

contact us

Fill in the form below - a real person reads every answer.

  • 10 questions
  • About 1 minute
Salutation
Preferred Communication Method (optional)
Salutation
Preferred Communication Method (optional)

We use your answers only to reply to you. They are kept for 425 days. Your answers stay on this device for 24 hours until you send them.

What happens next

  1. We read your request, usually the same working day.
  2. A specialist replies with answers or a few questions.
  3. You decide - no obligation.
QR code that opens a Telegram chat with TFI Co at t.me/tfico
Scan to chat with TFI on Telegram (t.me/tfico)

Talk to TFI about your precision bending

Ask TFI for more. Send the material, thickness and length you work with, chat with us on Telegram or call us, and ask for the datasheet and a quotation.

Section
Press Brakes
Reading time
4 min read

Discuss this with our team

Tell us what you need: call us or chat on Telegram, and our team gets back to you.

Send an enquiry