On this page7
  1. The controls
  2. What a CNC control engineer does at TFI
  3. You will fit in if
  4. How to apply
  5. Frequently asked questions
  6. Other roles at TFI
  7. A question before you apply?

One customer runs a Siemens control, the next one a Delem, the next one a Chinese Estun. If you feel at home in more than one of them, TFI Co wants to talk to you as a CNC control engineer. We set up, repair and upgrade the controls of press brakes, shears, tube benders and fiber lasers.

Apply for this role

The controls

CNC control families we work with

  • Germany

    Controls (examples)
    Siemens SINUMERIK and Siemens PLC
    Usually on
    CNC machines, press brakes, PLC-run lines
  • Other European countries

    Controls (examples)
    Delem (Netherlands), ESA (Italy), Cybelec (Switzerland)
    Usually on
    Press brakes and shears
  • China

    Controls (examples)
    Estun, Bochu (CypCut, FSCUT), GSK, KND
    Usually on
    Press brakes, shears, fiber lasers, lathes

CNC control families we work with

  • Germany

    Controls (examples)
    Siemens SINUMERIK and Siemens PLC
    Usually on
    CNC machines, press brakes, PLC-run lines
  • Other European countries

    Controls (examples)
    Delem (Netherlands), ESA (Italy), Cybelec (Switzerland)
    Usually on
    Press brakes and shears
  • China

    Controls (examples)
    Estun, Bochu (CypCut, FSCUT), GSK, KND
    Usually on
    Press brakes, shears, fiber lasers, lathes

You do not need to know all of them. Tell us in the form which ones you have worked on, and for how long.

What a CNC control engineer does at TFI

  • Install, set up and set the parameters of CNC and NC controls on press brakes, shears, tube benders and fiber lasers.

  • Back up and restore controls, and replace faulty drives, encoders and panels.

  • Find axis, servo and back-gauge faults, and read the PLC side when the fault is there.

  • Upgrade older machines from NC to CNC control, with TFI's hydraulic systems engineers where the hydraulics change too.

  • Teach operators to program bends and cuts on their control.

  • Install, set up and set the parameters of CNC and NC controls on press brakes, shears, tube benders and fiber lasers.

  • Back up and restore controls, and replace faulty drives, encoders and panels.

  • Find axis, servo and back-gauge faults, and read the PLC side when the fault is there.

  • Upgrade older machines from NC to CNC control, with TFI's hydraulic systems engineers where the hydraulics change too.

  • Teach operators to program bends and cuts on their control.

CNC controller and safety labels on a TFI press brake
CNC controller on a TFI press brake

You will fit in if

  • You have set up or repaired at least one family of the controls below.

  • You understand servo drives, encoders and the machine's electrical diagrams.

  • PLC knowledge (for example Siemens S7) is a plus.

  • You stay calm in front of a stopped machine and a waiting customer.

  • You have set up or repaired at least one family of the controls below.

  • You understand servo drives, encoders and the machine's electrical diagrams.

  • PLC knowledge (for example Siemens S7) is a plus.

  • You stay calm in front of a stopped machine and a waiting customer.

How to apply

  1. Apply online.

    One short form, about five minutes. Your answers stay saved on your device, so you can stop and finish later.

  2. TFI reads your application.

    A person from the TFI team reads it, not a robot.

  3. We call you.

    When your experience matches the role, we call you to talk about the work and our conditions.

  1. Apply online.

    One short form, about five minutes. Your answers stay saved on your device, so you can stop and finish later.

  2. TFI reads your application.

    A person from the TFI team reads it, not a robot.

  3. We call you.

    When your experience matches the role, we call you to talk about the work and our conditions.

Apply for this role

Frequently asked questions

I know only one control family. Can I apply?

Yes. Deep knowledge of one family is worth a lot. Tell us which one, and what you have done with it.

Is this a programming job?

Mostly not. The work is setting up, repairing and upgrading the controls on machines, and teaching operators to program them.

Do I need a CV file to apply?

No. The form asks for your experience in a few short answers. You can add a CV or a link to one if you have it.

Can I apply for more than one role?

Yes. Choose the role that fits you best in the form and mention the other one in your story. We consider you for both.

Can I finish the form later?

Yes. Your answers stay saved on your own device until you send the form, so you can come back and finish.

Other roles at TFI

See all jobs at TFI Co in one place.

A question before you apply?

Ask us about the role on Telegram or call us. Then apply online so your details reach the right person.

Section
CNC and machine controls
Reading time
3 min read

Discuss this with our team

Tell us what you need: call us or chat on Telegram, and our team gets back to you.

Send an enquiry