On this page6
  1. What a hydraulic systems engineer does at TFI
  2. You will fit in if
  3. How to apply
  4. Frequently asked questions
  5. Other roles at TFI
  6. A question before you apply?

Every TFI press brake, shear and press runs on hydraulics. When a cylinder leaks or a beam loses parallel, the customer needs someone who knows hydraulics from the inside. TFI Co is looking for experienced hydraulic systems engineers with at least five years of hands-on work.

Apply for this role

What a hydraulic systems engineer does at TFI

  • Hydraulic jacks and cylinders: find leaks, reseal and rebuild them, and test them under pressure.

  • Power units, pumps and valves on presses, press brakes, shears and ironworkers.

  • Faults that show up as pressure loss, slow strokes, heat, noise or a beam that is out of parallel.

  • Proportional and servo valves on CNC press brakes, together with TFI's CNC control engineers.

  • Advise customers on oil, filters and maintenance so the fault does not come back.

  • Hydraulic jacks and cylinders: find leaks, reseal and rebuild them, and test them under pressure.

  • Power units, pumps and valves on presses, press brakes, shears and ironworkers.

  • Faults that show up as pressure loss, slow strokes, heat, noise or a beam that is out of parallel.

  • Proportional and servo valves on CNC press brakes, together with TFI's CNC control engineers.

  • Advise customers on oil, filters and maintenance so the fault does not come back.

Hydraulic feed cylinder and coolant hose on a TFI band saw
Hydraulic feed cylinder on a TFI band saw

You will fit in if

  • You have at least 5 years of hands-on work on hydraulic jacks and hydraulic systems.

  • You read hydraulic schematics (ISO 1219 symbols) and find the fault from them.

  • You have worked with valves and pumps from known makers, for example Bosch Rexroth, Parker or Hoerbiger.

  • You measure before you change parts: pressure, flow and temperature.

  • You have at least 5 years of hands-on work on hydraulic jacks and hydraulic systems.

  • You read hydraulic schematics (ISO 1219 symbols) and find the fault from them.

  • You have worked with valves and pumps from known makers, for example Bosch Rexroth, Parker or Hoerbiger.

  • You measure before you change parts: pressure, flow and temperature.

How to apply

  1. Apply online.

    One short form, about five minutes. Your answers stay saved on your device, so you can stop and finish later.

  2. TFI reads your application.

    A person from the TFI team reads it, not a robot.

  3. We call you.

    When your experience matches the role, we call you to talk about the work and our conditions.

  1. Apply online.

    One short form, about five minutes. Your answers stay saved on your device, so you can stop and finish later.

  2. TFI reads your application.

    A person from the TFI team reads it, not a robot.

  3. We call you.

    When your experience matches the role, we call you to talk about the work and our conditions.

Apply for this role

Frequently asked questions

Why five years?

The work is on customers' production machines, where a quick and right diagnosis matters. Five years of hands-on hydraulics is the experience this role needs.

Do I need a CV file to apply?

No. The form asks for your experience in a few short answers. You can add a CV or a link to one if you have it.

Can I apply for more than one role?

Yes. Choose the role that fits you best in the form and mention the other one in your story. We consider you for both.

Can I finish the form later?

Yes. Your answers stay saved on your own device until you send the form, so you can come back and finish.

Other roles at TFI

See all jobs at TFI Co in one place.

A question before you apply?

Ask us about the role on Telegram or call us. Then apply online so your details reach the right person.

Section
Service and repair
Reading time
3 min read

Discuss this with our team

Tell us what you need: call us or chat on Telegram, and our team gets back to you.

Send an enquiry